Oxford Method Research Programme

Example

a) PVC can be stripped from panel completely.

b) Alternative if PVC cannot be stripped completely from panel. 

• Thoroughly clean the surface of area to be restored using a mild detergent, follow with a thorough rinse with clean water and allow to dry.
• Apply 1 coat passivation wash to primed areas and any exposed galvanising.
• After ensuring all surfaces are clean and dry apply overall to passivated surface or firm Plastisol 1 coat of epoxy primer or protective coatings alternative.
• Apply 1 coat of acrylic finish or protective coatings alternative.

PVC thinned but both intact and with good adhesion to the steel.

Example

• Thoroughly clean the surface of area to be restored using a mild detergent and follow with a thorough rinse with clean water and allow to dry. After ensuring all surfaces are clean and dry apply overall to passivated surface, 1 coat of acrylic finish, or alternative.

PVC stripping; 
continuous splits in styles rails plinth or cappings - up to 250mm girth.

Example

• As appropriate above or alternative in cases where PVC cannot be removed.